1.設置工程時，如果忘記了在C/C++選項卡上設置STM32F10X_HD,USE_STDPEFIPH_DRIVER編譯時會報如下的錯誤

Build target 'USART'  

compiling stm32f10x_it.c...  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h(96): error:  #35: #error directive: "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:    #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:     ^  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h: ..\User\stm32f10x_it.c: 0 warnings, 1 error  

compiling main.c...  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h(96): error:  #35: #error directive: "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:    #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:     ^  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h: ..\User\main.c: 0 warnings, 1 error  

compiling core_cm3.c...  

compiling system_stm32f10x.c...  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h(96): error:  #35: #error directive: "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:    #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:     ^  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h: ..\User\system_stm32f10x.c: 0 warnings, 1 error  

compiling stm32f10x_usart.c...  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h(96): error:  #35: #error directive: "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:    #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:     ^  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h: ..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c: 0 warnings, 1 error  

compiling stm32f10x_gpio.c...  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h(96): error:  #35: #error directive: "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:    #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:     ^  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h: ..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c: 0 warnings, 1 error  

compiling stm32f10x_rcc.c...  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h(96): error:  #35: #error directive: "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:    #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h:     ^  

..\Libraries\CMSIS\CM3\DeviceSupport\ST\STM32F10x\stm32f10x.h: ..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c: 0 warnings, 1 error  

Target not created  

2.要注意新建工程包含庫文件的路徑是

\Libraries\STM32F10x_StdPeriph_Driver\inc

而不是

\Libraries\STM32F10x_StdPeriph_Driver\src
 

3.Overlapping of Algorithms at Address 08000000H錯誤

工程設置里，誤多添加了下載算法，刪除后即可。

//============================================================================================

備注::

1>今天燒寫STM32遇到一個新問題----出現data not matching at address 0x80000000，最后把問題找到是燒寫的串口線出了問題 ，導致燒完程序再讀回驗證出了問題。